CERLOS

OBSERVE, INNOVATIVE, DEVELOP

INTRODUCTION

In addition, in almost all cases CERLOS products are superior in performance to comparable products at a price point equal to or less expensive than their comparable. CERLOS products are made in an environmentally responsible way. Our proprietary, low-cost, low-energy process converts wood fibers and agricultural residues into high-performance building products for green building.

MOXY OID is at a pivotal point, shifting from $22.5 million in R&D to an operating profitable company by commencing manufacturing of its market entry product, CERLOS Siding/Cladding. The majority of the fund (60%) will be used by MOXY OID to build a High capacity manufacturing facility in the Pacific Northwest, in North America to meet the demand for CERLOS products. Legal, Business Development and Administrative expenses will use 10% of the funds raised. Marketing and Business Development will use 10%. Research and Development will be allocated 10% of the funds raised while the balance 10% is allocated to take care of the issue and fund raising related expenses.

CERLOS Inc is raising US$20,800,000 through an IEO, offering an Asset-Backed Token to acquire 25% equity stake in MOXY OID which is the Canadian Operating company belonging to the same group. By virtue of this investment, the Token Holders of CERLOS Inc will receive 90% of the dividends earned by CERLOS Inc. The token offering is facilitated by CGCX.io exchange where the tokens will also be listed and traded subsequent to the offer.

WHAT IS CERLOS ?

CERLOS — is an eco-friendly, sustainable, high-performance building material that is fire, mold, rot and insect resistant. CERLOS was born from our desire to solve four global issues: (1) agricultural/forestry waste, (2) energy shortfall, (3) hazardous building materials, and (4) environmentally unsustainable materials. As a result, it will improve the quality of life physically, financially and environmentally. CERLOS is holding a fundraiser via IEO so we can build a manufacturing facility for commercial production of CERLOS products. We welcome investment opportunities, strategic partnerships and certified representatives to join us.

VISION

• MOXY OID will become a global supplier of sustainable building products, initially accelerating High-Capacity manufacturing operations in North America, followed by Europe, Latin America, and Asia-Pacific.
• MOXY OID’s market launch product line will be siding/cladding/fascia, followed by roofing products, and then panel boards, displacing competitive, yet inferior, plywood, oriented strand board (OSB), mediumand high-density fiberboard (MDF/HDF) and other engineered wood, fiber cement, plastic MgO boards, and other composite products including drywall.

MOXY OID’S GOAL IS:

1. Patent application.
2. Choose a site to build high-capacity manufacturing facilities in the Pacific Northwest. The site must have railroad access and road transportation. The facility must cover an area of 60,000 to 80,000 square feet with an area of about 10 to 20 hectares to accommodate incoming and outgoing material. Initially, we preferred to rent out property and buildings.
3. Using traditional media to market CERLOS products to the building materials community.
4. Use influencer marketing to bring CERLOS products to the attention of home and building owners.
5. Introducing the CERLOS Certified Representatives program with a view to creating strong regional and national sales force who are trained to use and promote CERLOS products.

FIRE DAMAGE

An estimated $23 billion in property damage occurred in the United States alone as a result of fire in 2017, this number includes a $10 billion loss in wildfires in Northern California. These fires resulted in 3,400 civilian fire fatalities, 14,670 civilian fire injuries. There was a civilian fire death every 2 hours and 34 minutes and a civilian fire injury every 36 minutes in 2017. A fire occurs in a structure at the rate of one every 63 seconds, and a home fire occurs every 88 seconds.

PESTS & INSECTS DAMAGE

Termites and rodents destroy most common building materials from structural beams to siding/cladding. U.S. annual pest control costs are approaching $10 billion per year, while world-wide the figure is far higher. In addition to the billion in costs attempting to prevent insect damage, the protection often relies on toxic chemicals that endanger children, other animals and ultimately, humanity.

MOLD & MILDEW DAMAGE

Wood and drywall can trap moisture and feed mold or mildew in our homes. Before a construction team completes a home, the wood often gets exposed to humidity, rain, freeze/thaw, sun, and even snow. Eventually mold damage can penetrate a home to the extent that walls and structural components must be torn out and replaced. Children and older adults are especially susceptible to respiratory diseases from mold exposure.

AND ENVIRONMENT & HEALTH DAMAGE

In addition to the death and destruction, available materials are damaging the environment. Many commonly used building materials contain toxins like cyanide while others contain silicas, known cancer causing agents. Numerous other building materials at the end of their life cycle are considered hazardous waste. Combined with the fact that these materials contribute to massive deforestation, we are creating more unusable waste while depleting resources.

After over 18 years and US$20 million spent on Research and Development, we have developed a brand new building material that addresses many problems associated with current building materials. CERLOS solves the following issues:

1. SUSTAINABILITY

Unlike other building materials, CERLOS is created using 100% sustainable methods and can be 100% recycled after use to make brand new CERLOS.

2. DURABILITY

CERLOS products are fire resistant, insect/bird/rodent resistant, rot and mold resistant, water and all-weather stable (will not shrink or swell), or decay or be influenced from environmental hazards.

3. ECO-FRIENDLY

Our primary ingredient is lignocellulosic fiber. Lignocellulosic fiber is basically the cells of virtually all living plants, so the fiber can come from straw, cornstalks, or from any other agricultural or forestry waste.

WHY ARE WE HOLDING A TOKEN SALE?

We have functioning prototypes. CERLOS works. High volume manufacturing process has been validated. Now we need to tell the world! The Token Sale will allow us to scale the CERLOS vision, through covering necessary manufacturing and marketing costs needed to fulfill orders.

Unsold tokens will be retained by the Company as treasury tokens. Just like treasury shares they are not included in the distribution of dividends or the calculation of earnings per token. The Company, through a board resolution, may decide to offer them again for funding at a future date.

WHO WILL QUALIFY TO INVEST?

Qualified investors must undergo a KYC process. Investors from the following countries are not allowed to participate: Malaysia, USA, Canada, Syria, Iran, Iraq, Congo, Libya, North Korea, Somalia, Sudan, Ukraine, Venezuela, Yemen, Zimbabwe, Belarus, Cuba.

Qualified investors must undergo a KYC process. Investors from the following countries are not allowed to participate: Malaysia, USA, Canada, Syria, Iran, Iraq, Congo, Libya, North Korea, Somalia, Sudan, Ukraine, Venezuela, Yemen, Zimbabwe, Belarus, Cuba.

TOKEN INFO

TOKEN NAME: CERLOS

MINIMUM GOAL: $2,000,000

FUNDRAISING GOAL: $20,800,000

TOKEN SUPPLY: 25 MILLION TOKENS

NOMINAL TOKEN PRICE: $1

JURISDICTION: Labuan — Malaysia

ASSET CLASS: Asset Backed Token

INVESTORS RIGHT: Right to receive income linked to profits

ACCEPTED INVESTMENT CURRENCIES: Bitcoin, Ethereum, USD, Euro, GBP

ROADMAP

1985

Alan Heywood (President & CTO) purchased a patent and formed C-Max Technologies International Inc.

1986-2002

Lab research and testing. The IP is developed. $12 million spent on R&D.

2002

C-Max Technologies is dissolved. Alan develops the technology as a sole proprietor.

2003-2008

Alan continues to research, focusing on sources of ingredients and process equipment. Engagement with Corvallis Tool Company of Oregan to design and manufacture a preliminary design. Further $1 Million is spent on R&D.

2010

MOXY OID is established to aid the management and commercialization of the technology. Cost: $2 Million.

2012-2017

Pilot Plant process facility is built in Holland by VDL Enabling Technologies group. High-volume production validated. $7 Million spent.

2018-2019

Preparation and development of websites and documents for funding of high-volume manufacturing facility and legal requirements. Cost is $500k.

March 2020

Pre-Sale Starts

First Quarter 2020

Begin High-Capacity design/build of manufacturing line

Second Quarter 2020

Canada/US Site Selection

Second Quarter 2021

First Employment of High-Capacity of 450 million ft2 per year in North America

FOR MORE INFORMATION CLICK LINK BELLOW:

• Website: https://cerlos.io/
• Telegram : https://t.me/moxy_cerlos
• Whitepaper: https://cerlos.io/wp-content/uploads/2020/01/Cerlos_Whitepaper_v3.pdf
• LinkedIn: https://linkedin.com/company/moxyoid/
• Twitter: https://twitter.com/Moxy_CERLOS
• Facebook: https://www.facebook.com/MoxyMakesCerlos/
• Instagram: https://linkedin.com/company/moxyoid/
• YouTube: https://www.youtube.com/channel/UC-aWkf565-blgwQOo8AnhzQ
• Medium: https://medium.com/@moxy_cerlos

Author: Batu permata

My Bitcointalk Profile: https://bitcointalk.org/index.php?action=profile;u=1875984