Minggu, 31 Maret 2019

Dago Mining

ECOLOGICAL BITCOIN MINING



WHY USE GREEN ENERGY?

To date, 80% of the energy used for extraction is produced by coal-fired power plants (China, Russia …), also the Blockchain works with that energy, pollution deriving from miming is disastrous for the environment and the climate… Mining is very profitable, if done in the right way, using new technologies. Dago Mining can install its highly scalable and low-cost PV power plants worldwide. There are renewable energy resources in every nation, they can be used to reduce harmful emissions of greenhouse gases. Hydroelectric, geothermal and solar plants are possible and at affordable costs.

GREEN POWER

Solar Collector
FRENELL offers a Concentrated Solar Power (CSP) technology based on Linear Fresnel collector principle. Parallel rows of flat mirrors are mounted onto a sheet metal base structure. These lines reflect direct solar radiation onto a stationary receiver unit. Molten salt is pumped through the absorber tube and heated up to 550°C by the sun’s concentrated energy. The heat is transferred from the solar field to a Thermal Energy Storage system. FRENELL established automotive manufacturing techniques to produce its primary reflectors and receivers in large volumes in fully automated in-house production lines with 100% quality control. The manufacturing facilities are mobile, to realize on-site production – minimizing transportation cost and increasing local content.
FRENELL’s technology competes with fossil-fuel power plants in regions with high solar irradiation. The capability of providing Thermal Energy Storage leads to high capacity factors and grid parity which is of prime importance for energy providers and major industrial consumers. Therefore, FRENELL’s technology can provide base load electricity and demand-responsive power input. The technology can be used in greenfield projects as well as to extend new or existing fossil-fired power stations.
FRENELL’s technology competes with fossil-fuel power plants in regions with high solar irradiation. The capability of providing Thermal Energy Storage leads to high capacity factors and grid parity which is of prime importance for energy providers and major industrial consumers. Therefore, FRENELL’s technology can provide base load electricity and demand-responsive power input. The technology can be used in greenfield projects as well as to extend new or existing fossil-fired power stations.
Storage
Cost-effective energy storage is key to transitioning to a low-carbon society. Energy can be stored in the form of heat or electricity. A popular storage method for high-temperature thermal applications is a molten salt tank. Fact sheets created by the German Energy Storage Association, or BVES for short, show that molten salt tanks are around 33 times less expensive than electric batteries when it comes to storing a kilowatt-hour in them.
CSP plants and provide a constant on-demand supply of solar power without the need for fossil fuel backup systems. Companies such as German-based Frenell, formerly Novatec, offer a turnkey solution combining a solar field and a proprietary direct molten salt technology. This solution can be used, for example, in seawater desalination and enhanced oil recovery. “We have made improvements to our systems, which uses molten salt directly as the heat transfer fluid,” Max Mertins, CTO of Frenell, said. “They allow for a large temperature difference, around 280 K, and lead to heat storage costs ranging from 15 to 25 EUR/kWhth.”

NEW TECHNOLOGY

Through dedicated hardware and software, we intend to develop a flexible structure capable of modifying the extraction of cryptocurrencies based on the profitability of the moment. The biggest producers of miners are also the biggest cryptovalute extractor in the world, they distribute the equipment very slowly, aware that this will increase the difficulty of mining in particular for them (Bitman etc.), in 2018 the Internet group GMO produced and launched a 33nm 7nm ASIC chip with a consumption of 3.4Kw. By assembling the equipment ourselves with the help of our partners, we have the possibility to choose the most efficient components on the market with a higher renewal speed at lower costs, already today we have a 44Th/s technology that consumes 2.1Kw, the use of renewable energy combined with the accumulators makes us independent and highly remunerative. We are not subject to increases in energy costs or momentary availability.
The industrial machines created until now become obsolete within 3-5 months, the delivery times of these machines are very long (even months).
Energy consumption and equipment renewal are the biggest costs to bear. By assembling the equipment by ourselves, we have the possibility to choose the most efficient components on the market with a faster renewal speed at lower costs, the use of renewable energy combined with accumulators makes us independent and highly remunerative.
This will give us the opportunity to offer a service with free power upgrades in order to protect the profitability of every person who decides to undertake a new perspective of financial realization with us. Even those who don’t have computer skills must have the possibility to obtain benefits from technology.

Roadmap



TEAM

Valter Marelli: CEO – Director
Fabrizio Saltori: Logistics and Infrastructures Manager
Mary Jo Marelli: Graphic Designer
Patrizia Mereu: Video Designer
Raffaella Arcelli: Human Resources Manager
Giorgio D’Amico: CFO
Yogesh Raje: Advisor, MENAIS Director
Alessandro Giulianelli: Advisor, Hardware and Software Expert
Kevin Donnery: Advisor
Md Ayub Emon : Advisor
Author: Yuni comel
My Bitcointalk Profile: https://bitcointalk.org/index.php?action=profile;u=1350925
ETH Address: 0xA5d3c9288F1C6A4a9D1298456DBCcDf9e2811896

Tidak ada komentar:

Posting Komentar

Lambo Finance

  The First and Only Auto Staking & Auto Compounding That Pay You BNB & SHIB & LAMBO with Fixed 900,368.00% APY INTRODUCTION Lam...